Pro 575 / Pro 22
When the data plate or manual names Pro 575, Pro 22, or another cooker in that Traeger size family.
Grills / cover fit
Choose the pellet grill cover by exact model fit.
Match the cover to the cooker family before comparing fabric or price. A cover that fits the barrel but blocks the hopper, chimney, shelf, or wheel path is the wrong purchase. Record the grill model, accessory layout, and measured points so the replacement path stays clear.
Best fit
Model family is the first gate
Pro 34 / Texas
When the cooker is a Pro 34 or Texas model that shares that larger barrel and chimney profile.
Aftermarket shelves, smoke stacks, or side tables can make a model-specific cover too tight. Measure every fixed protrusion before choosing a universal alternative.
Spec table
Match the cover to the cooker model
| Decision factor | Traeger BAC503 Pro 575 / Pro 22 | Traeger BAC380 Pro 34 |
|---|---|---|
| Grill family | Pro 575, Pro 22, and related Traeger models in that size line per the listing. | Pro 34 and Texas models per the listing. |
| Published cover size | 35 L × 23 W × 42 H in. on the Amazon listing. | 49 L × 22 W × 39 H in. on the Amazon listing. |
| Fit style | Form-fitted full-length cover for the Pro 575/22 body. | Form-fitted full-length cover for the Pro 34 body. |
| Material | Heavy-duty polyester; water resistant per Traeger. | Heavy-duty polyester; water resistant per Traeger. |
| Storage routine | Faster on/off when the cooker matches the named family. | Full-length coverage for the larger hopper and shelf layout. |
| Critical tradeoff | Still needs an exact model check; a nearby Traeger name is not proof of fit. | Larger cover footprint; wrong family leaves gaps or wind-catching fabric. |
Amazon options
Two Traeger covers for the common pellet-grill families.
As an Amazon Associate we earn from qualifying purchases.
BAC503 / ASIN B07NNY12VK
Traeger Full-Length Grill Cover Pro 575 / Pro 22
Form-fitted full-length cover when the cooker is in the Pro 575 or Pro 22 family. Confirm the exact grill model and accessory layout before ordering. A nearby Traeger name is not proof of fit.
BAC380 / ASIN B01BH3RTUM
Traeger Full-Length Grill Cover Pro 34
Form-fitted full-length cover for Pro 34 or Texas models in that size family. The larger cover needs the correct hopper and shelf clearance. Modified grills may need measured universal fit instead.
Measure worksheet
Record the cooker before you click buy
- Confirm the model.Match the data plate, manual, and purchase record. Write the exact grill family before comparing covers.
- Measure width.Measure at the widest point with side shelves in the storage position you use between cooks.
- Measure depth.Include the hopper, front shelf, and any fixed accessory that changes the silhouette.
- Measure height.Measure to the chimney or smoke stack top, not just the lid line.
- Check openings.Mark vent paths, wheel clearance, grease bucket access, and the route needed to lift the cover off.
- Compare to the chart.Cross-check your notes with the cover maker's size chart and the published listing dimensions.
Decision checkpoints
Check fit, ventilation, and moisture before buying a cover
A loose cover can flap against painted surfaces and catch wind. A tight cover can strain seams, snag the hopper, or block the path needed to remove it. The useful size sits above the ground, clears protruding controls, and leaves enough room to lift off without dragging.
A cover belongs at the end of the shutdown routine. Grease, ash, and trapped water remain maintenance problems under fabric. Clean and dry the cooker before the cover goes on.
- Exact model: use the manufacturer cover first when the grill model and accessory layout match exactly.
- Modified grill: measure every fixed accessory; shelves, stacks, handles, and aftermarket parts can make a model cover too tight.
- Wind exposure: check fastening, vent placement, and clearance on an open deck versus a protected patio.
- Moisture trap: do not cover a warm or wet cooker; trapped heat and water accelerate finish wear.
- Replacement path: keep the grill model with the cover purchase record so the next cover order starts from fact, not memory.
FAQ
Common questions
Can I use a universal cover on a pellet grill?
Yes, when its measurements and fastening method fit the whole cooker. A model-specific cover usually reduces guesswork around the hopper, chimney, and shelves.
Should the grill be covered while warm?
No. Let the cooker cool and dry first. A cover over a warm or wet grill traps moisture against the finish.
How do I measure for a pellet grill cover?
Use the grill manual and the cover maker's size chart. Measure width, depth, height to the chimney, shelf position, hopper protrusion, and wheel clearance before ordering.